Cookies disclaimer

Estoy de acuerdo utilizamos cookies para mejorar la experiencia de navegación del usuario y para estudiar cómo se utiliza nuestro sitio web. si navega por nuestro sitio web, estará aceptando el uso de las cookies en las condiciones establecidas en la presente política de cookies. esta política puede ser actualizada, por lo que le invitamos a revisarla de forma regular

50-00-0 - Formaldehyde, 37% w/w aq. soln., stab. with 7-8% methanol - Formalin - Formol - A16163 - Alfa Aesar

A16163 Formaldehyde, 37% w/w aq. soln., stab. with 7-8% methanol

Número CAS
50-00-0
Nombre Alternativo
Formalin
Formol

Tamaño Precio ($) Cantidad Disponibilidad
100ml 18,60
500ml 20,10
2500ml 38,10
Añadir al carrito Añadir al presupuesto al por mayor Ver artículo

Formaldehyde, 37% w/w aq. soln., stab. with 7-8% methanol

MDL
MFCD00003274
EINECS
200-001-8

Propiedades químicas

Fórmula
CH2O
Peso molecular
30.03
Punto de fusión
-15°
Punto de ebullición
97°
Punto de inflamabilidad
60°(140°F)
Densidad
1.083
Índice de refracción
1.3765
Solubilidad
Soluble in water.

Aplicaciones

Formaldehyde is used as a denaturant in formaldehyde-agarose gel electrophoresis of RNA. It is also used in fiber board, plywood, cigarette smoke, fuel burning appliances, kerosene space heaters and in photography. It acts as a precursor in the manufacturing of automobiles and used to make components for the transmission, electrical system, engine block, door panels, axles and brake shoes. It serves as a disinfectant. It also plays an ingredient in glues and as a preservative in medical laboratories as embalming fluid and as a sterilizer.

Notas

Incompatible with oxidizing agents.

Referencias documentales

Numerous examples of the use of aqueous formaldehyde are to be found in Organic Syntheses. See also Paraformaldehyde, A11313, and 1,3,5-Trioxane, A15639.

Liu, X.; Guo, Z.; Roache, N. F.; Mocka, C. A.; Allen, M. R.; Mason, M. A. Henry’s Law Constant and Overall Mass Transfer Coefficient for Formaldehyde Emission from Small Water Pools under Simulated Indoor Environmental Conditions. Environ. Sci. Technol. 2015, 49(3), 1603-1610.

Bahmanpour, A. M.; Hoadley, A.; Tanksale, A. Formaldehyde production via hydrogenation of carbon monoxide in the aqueous phase. Green Chem. 2015, 17 (6), 3500-3507.

Indicaciones de peligro y de precaución del GHS

Indicaciones de peligro (UE): H301-H311-H331-H317-H314-H226-H351-H371

Toxic if swallowed. Toxic in contact with skin. Toxic if inhaled. May cause an allergic skin reaction. Causes severe skin burns and eye damage. Flammable liquid and vapour. Suspected of causing cancer. May cause damage to organs.

Indicaciones de precaución: P210-P260-P201-P301+P310-P303+P361+P353-P305+P351+P338-P361-P301+P330+P331-P405-P501a

Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Do not breathe dust/fume/gas/mist/vapours/spray. Obtain special instructions before use. IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Rinse mouth. Do NOT induce vomiting. Store locked up. Dispose of contents/container in accordance with local/regional/national/international regulations.

Otras referencias

Merck
14,4235
Beilstein
1209228
Clase de peligro
3
Grupo de embalaje
III
Código de tarifa arancelaria unificado
2912.11
TSCA
Yes
RTECS
LP8925000

Recomendado

Visto recientemente

Productos químicos

Ciencias de la vida

Metales & materiales

Catalizadores

Análisis y material de laboratorio