Cookies disclaimer

Estoy de acuerdo utilizamos cookies para mejorar la experiencia de navegación del usuario y para estudiar cómo se utiliza nuestro sitio web. si navega por nuestro sitio web, estará aceptando el uso de las cookies en las condiciones establecidas en la presente política de cookies. esta política puede ser actualizada, por lo que le invitamos a revisarla de forma regular

16853-85-3 - Lithium aluminum hydride, powder, 97% - Lithium tetrahydridoaluminate - Lithium aluminum hydride - A18116 - Alfa Aesar

A18116 Lithium aluminum hydride, powder, 97%

Número CAS
16853-85-3
Nombre Alternativo
Lithium tetrahydridoaluminate
Lithium aluminum hydride

Tamaño Precio ($) Cantidad Disponibilidad
10g 28,84
25g 55,20
100g 127,00
Añadir al carrito Añadir al presupuesto al por mayor Ver artículo

Lithium aluminum hydride, powder, 97%

MDL
MFCD00011075
EINECS
240-877-9

Propiedades químicas

Fórmula
LiAlH4
Peso molecular
37.95
Punto de fusión
>125° dec.
Densidad
0.917
Sensibilidad
Air & Moisture Sensitive
Solubilidad
Soluble in water, diethyl ether and terahydrofuran.

Aplicaciones

Lithium aluminum hydride is used as a reducing agent in various synthetic organic chemistry reactions. For example, it is used in the conversion of esters, carboxylic acids, acyl chlorides, aldehydes and ketones into their corresponding alcohols. It also involved in the conversion of amide, nitro, nitrile, imine, oxime and azide compounds into their amines as well as reduces alkyl halides to alkanes. It reacts with sodium chloride to prepare sodium hydride. It acts as a potential hydrogen storage medium, which could be used for future fuel cell-powered vehicles. It is mainly used in the preparation of other tetrahydridoaluminumates like sodium aluminum hydride, potassium aluminum hydride and magnesium alanate. Furthermore, it has been used to prepare thermoplastic polyester polyamides from oleic acid and lithium-polymer batteries.

Notas

Air and moisture sensitive. Incompatible with water, strong oxidizing agents, alcohols, carboxylic acid, peroxides, chlorinated solvents, halogens and oxygen. It reacts violently with water and release hydrogen gas.

Referencias documentales

Many procedures for reactions with this reagent which have been described in the literature are potentially unsafe on anything other than a very small scale, since often no precautions are given for mixing the reagent with flammable solvents. The following suggestions are offered for laboratory scale reductions:

Mixing with a flammable solvent must always be carried out under an inert atmosphere.

Reverse addition (solvent to reagent), if done rapidly, may be safer.

For THF, at least 10ml solvent per gram of reagent is recommended to absorb heat of mixing.

Efficient stirring is essential during mixing, reaction and workup.

The use of water or steam baths, or of electric heating mantles is to be strongly discouraged.

The reduction reaction should preferably be controlled by adjusting the rate of addition of the substrate rather than relying on external heating or cooling.

External heating or cooling, if required, should be by means of a suitable inert oil.

The use of Diethoxymethane, B23134 as a reaction solvent has also been recommended.

For phase-transfer reductions in hydrocarbon solvents, see 15-Crown-5, A12265. For formation of lithium tris(diethylamino)aluminum hydride and use in the reduction of esters or amides to aldehydes, see Diethyl­amine, A11716. For formation of a reagent for reduction of carboxylic acids to aldehydes, see 1-Methyl­piperazine, A10837.

For reduction of sulfones, see Titanium(IV)­ chloride, 14713.

Monograph: J. Seyden-Penne, Reductions by the Alumino- and Borohydrides In Organic Synthesis, 2nd ed., Wiley, N.Y. (1997).

Hsu, C. P.; Jiang, D. H.; Lee, S. L.; Horng, J. L.; Ger, M. D.; Chang, J. K. Buckyball-, carbon nanotube-, graphite-, and graphene-enhanced dehydrogenation of lithium aluminum hydride. Chem. Commun. 2013, 49 (78), 8845-8847.

Gooodman, C. A.; Janci, E. M.; Onwodi, O.; Simpson, C. C.; Hamaker, C. G.; Hitchcock, S. R. A two-step, one pot preparation of amines via acyl succinimides. Synthesis of the calcimimetic agents cinacalcet, NPS R-467, and NPS. Tetrahedron Lett. 2015, 56 (30), 4468-4471.

Indicaciones de peligro y de precaución del GHS

Indicaciones de peligro (UE): H260-H314-H318

In contact with water releases flammable gases which may ignite spontaneously. Causes severe skin burns and eye damage. Causes serious eye damage.

Indicaciones de precaución: P231+P232-P262-P280-P303+P361+P353-P305+P351+P338-P308-P310a-P378m

Handle under inert gas. Protect from moisture. Do not get in eyes, on skin, or on clothing. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Use for extinction: Limestone powder.

Otras referencias

Merck
14,349
Clase de peligro
4.3
Grupo de embalaje
I
Código de tarifa arancelaria unificado
2850.00
TSCA
Yes
RTECS
BD0100000

Recomendado

Visto recientemente

Productos químicos

Ciencias de la vida

Metales & materiales

Catalizadores

Análisis y material de laboratorio